What you are looking at: black shell with moulded side ribs, recessed key row
DY16 Jump Starter and Air Compressor with Ribbed Grip Body
Same electrical platform as DY15 with a different shell: moulded ribs run down both sides and the key row sits in a recess. That matters when the unit is used with gloves or stored loose in a tool bag. 6000mAh, 500A starting, 1000A peak, 150 PSI through a 19mm cylinder.
Features
- Moulded side ribs for a gloved grip
- Recessed key row, less prone to knocks
- 500A starting current, 1000A peak
- 150 PSI pump with digital cut-off
- Reverse-polarity protected clamps
- USB-C charging, LED work light
Specifications
| Battery capacity | 6000mAh |
|---|---|
| Working voltage | 14.5V |
| Cylinder diameter | 19mm |
| Pressure range | 0.35-10.5Bar/5-150PSI |
| Starting current | 500A |
| Peak current | 1000A |
| Product size | 150x75x50mm |
| Net weight | 515g |
| Package size | 115*103*185mm |
| Colour box weight | 815g |
| Quantity per carton | 20pcs |
| Carton size | 530*245*390mm |
| Gross weight | 16.7kg |
Why buyers order this model
Moulded side ribs and a recessed key row for gloved handling.
How sourcing and shipping work
Confirm spec and quote
Send the model and the market you sell into. We confirm specification, MOQ and lead time, and return a quote with freight within 24 hours.
Sample, then production
We send a sample or a batch photo set for your approval, then produce against that agreed sample.
Inspect and ship
Pre-shipment inspection against the approved sample, with photos and a written report, before the balance is released. FCL or LCL from Ningbo.
Buying questions
- What is the actual difference between DY15 and DY16?
- Only the housing. DY16 adds grip ribs and a recessed key row; the cell, motor, cylinder and controller are the same, so 6000mAh, 500A starting, 1000A peak and 150 PSI apply equally.
- Will it inflate a light-truck tyre?
- 150 PSI covers passenger cars and most light-truck tyres. Time rises with air volume, so a 31-inch off-road tyre takes noticeably longer than a 16-inch passenger tyre. We time a full fill on a sample and report it rather than quote a blanket figure.
- How is the clamp protection tested?
- Each batch is sampled and the clamps are deliberately connected in reverse; the unit must refuse to latch and must not heat the leads. The result goes into the inspection report with photos.
- What is the MOQ and lead time?
- Standard build is 100-500 pieces depending on branding, with 20 units per carton. Production is typically 20-30 days after sample approval, confirmed in writing with the quote.
Typical buyers
Drivers who want one unit for a flat battery and a soft tyre, and distributors selling roadside or emergency kits.
Documents we can prepare
- Commercial invoice and packing list
- UN38.3 test summary for the lithium pack
- CE or FCC declaration as required by the destination
- Pre-shipment inspection report with photos
Need a specification or a sample?
Send the model, quantity and destination port. We reply with price, lead time and packing details.
Request a quoteQuick facts: DY16 Jump Starter and Air Compressor with Ribbed Grip Body
One-line answer: Moulded side ribs for a gloved grip; Recessed key row, less prone to knocks. Export-ready from Ningbo with pre-shipment inspection.
Key points
- Working voltage: 14.5V
- Cylinder diameter: 19mm
- Pressure range: 0.35-10.5Bar/5-150PSI
- Starting current: 500A
- 500A starting current, 1000A peak
- 150 PSI pump with digital cut-off
- MOQ is typically 100-500 pieces and higher for OEM orders; it is confirmed in writing with the quote.
- Production runs 15-30 days for regular items and 30-45 days for complex or large orders, counted from sample approval and deposit.
- OEM/ODM is available: housing, printing, gift box, manual and voltage/plug type can be tailored to the destination market.
- Quotes are FOB Ningbo by default, CIF on request. Ningbo port sails direct to Europe, the Americas, Southeast Asia, the Middle East and Africa.
Buying questions
Can it be private-labelled?
Yes. Housing colour, printing, gift box, manual and plug standard can be customised; the exact MOQ depends on the process.
Are certification and test reports available?
CE, FCC and UN38.3 documents can be prepared for the destination market, with an AQL inspection report and photos before shipment.
What are the payment and lead-time terms?
Standard terms are 30% deposit and 70% before shipment by T/T; letters of credit are used for larger orders. Production runs 15-30 days for regular items and 30-45 days for complex or large orders, counted from sample approval and deposit.
Need a quote, a sample or a spec sheet?
[email protected] · +86 181 5404 8176 (WhatsApp)
Request a quote